Nokia S13X100R vs S13X100E: How To Tell These Two 100G Transponder Cards Apart

When sourcing spare OTN transponder/muxponder cards for the Nokia 1830 PSS platform, many network engineers and procurement teams mix up two very similar parts: S13X100R (8DG63207AA) and S13X100E (8DG63988AA).

Physically the two boards look nearly identical. They fit into the same slots and share most hardware capabilities, but there is one critical functional difference that will impact your network design. This article is based on the official Nokia datasheet for the S13X100 series 100G transponder.

Platform Overview: S13X100 Series

The S13X100 is a versatile 100G OTN transponder/muxponder powered by the PSE-2c Photonic Service Engine. It supports transponder, muxponder, uplink and OTN-ADM roles on the 1830 PSS-8, PSS-16ii and PSS-32 shelves.

Nokia S13X100R vs S13X100E: How To Tell These Two 100G Transponder Cards Apart


Figure 1: S13X100 block diagram and front-panel port layout, showing client-side interfaces and the PSE-2c engine

Key shared specifications for both variants:

  • 1 × 100G coherent tunable C-band line port, works with 50 GHz fixed-grid or flexible-grid DWDM networks
  • Client-side port set: 10 × SFP+ for 10GE / OTU2/2e / STM-64 / Fibre Channel, plus CFP4, QSFP+ and QSFP+/QSFP28 slots for 40GE / 100GE / OTU3 / OTU4
  • Built-in OTN switching with ODU0/ODU1/ODU2 grooming
  • Supports SD-FEC / HD-FEC, PRBS test and loopback diagnostic functions
  • Occupies one full-height slot; typical power consumption 162 W
  • Note: Client and line-side optics are sold separately, not included with the bare board.
  • Replacement requires redundancy configuration or scheduled maintenance window for live-network deployment.

S13X100R vs S13X100E — The Critical Difference

Part Number Board Designation Core Capability
8DG63207AA S13X100R 100G Transponder / Muxponder, no hardware-based Layer-1 encryption
8DG63988AA S13X100E Same base functions, adds AES-256 hardware Layer-1 link encryption

Important note for procurement: On the S13X100E, AES-256 encryption function requires valid software license enablement. The encryption feature does NOT activate automatically once the board is plugged in.

When should you pick each one?

  • Choose S13X100R (8DG63207AA) for standard metro DWDM, DCI, mobile backhaul where you do not require physical-layer link encryption.
  • Choose S13X100E (8DG63988AA) if your project mandates Layer-1 AES-256 secure transport for mission-critical traffic. Always double-check license availability during ordering.

Both boards can operate as transponder, muxponder, uplink or OTN-ADM; mechanical dimensions, slot compatibility and port layout are identical. You cannot tell them apart just from looking at the faceplate — always verify the printed part number label.

Compatibility Reminder

S13X100 cards work with these shelves:

✅ 1830 PSS-8, PSS-16ii, PSS-32
❌ Not compatible with older PSS-4 shelves.

Spare-Part Supply

Skyward Telecom carries large inventory of refurbished, fully-tested Nokia 1830 PSS spare boards including S13X100R and S13X100E. All hardware goes through functional testing before shipment.

If you are sourcing S13X100 series or other Nokia OTN / DWDM spare modules, browse our full selection:

Nokia Telecom Boards Collection

Reach out to us with your part numbers for stock check and quotation.

Back to blog

Leave a comment