7750 SR IOM Module Configuration

After the new IOM module is inserted into the chassis of 7750 sr, the system will automatically detect its model, and the output is as follows:

The above figure shows that after inserting the IOM module into slot 3, the system automatically recognizes that the current board is iom2-20g, but its running status shows unprovisioned. The Provisioned Card-type needs to be configured.
The number is the same as Equipped Card-type.

Configuration command: configure card 3 card-type iom2-20g
After the IOM completes startup, it enters the running state, as shown below: