400G QSFP-DD DR4 Optical Transceiver, 1310nm, SMF, 500m, MPO12, 400GBASE-DR4
400G QSFP-DD DR4 Optical Transceiver, 1310nm, SMF, 500m, MPO12, 400GBASE-DR4
300 in stock
Vendor: Skyward Telecom
Share
Collapsible row
Collapsible row
Our Services
- Cost-effective equipment
- Faster delivery
- Worldwide shipping
- Alternative supply
- Sample service
- Test and warranty
Our 400G QSFP-DD DR4 optical transceiver is a high-performance single-mode parallel module built for 400GBASE-DR4 Ethernet data center links. Designed for rack-to-rack and leaf-spine interconnection up to 500 meters over OS2 single-mode fiber.
Key Specifications
| Form Factor | QSFP-DD |
| Data Rate | 400Gbps (4×100G PAM4) |
| Wavelength | 1310nm, EML |
| Fiber Type | Single Mode Fiber (OS2 SMF) |
| Transmission Distance | 500m |
| Connector | MPO12 (PC end-face, APC available upon request) |
| Working Temp | 0℃ ~ 70℃ |
| Diagnostic | DDM / Digital Diagnostics Monitoring |
Compatibility List
Follows the IEEE 802.3bs 400GBASE-DR4 and QSFP-DD MSA standard. It works with network switches, routers and adapters equipped with QSFP-DD ports that accept generic compliant transceivers. Please confirm your host device transceiver whitelist and 400G DR4 support before ordering.
Core Advantages
- ✅ Hot-pluggable QSFP-DD design, easy installation and replacement
- ✅ Stable parallel 4-lane 100G PAM4 signal for 500m single-mode links
- ✅ Strictly 100% tested before shipment, stable for long-term running
- ✅ Compliant with CMIS, IEEE 802.3bs and QSFP-DD MSA specifications
- ✅ RoHS compliant, low power consumption
- ✅ DDM function, real-time monitoring of temperature, power, voltage
Typical Applications
- Data center leaf-spine switching interconnection
- AI cluster, HPC high-speed computing network
- Rack-to-rack 400G short-reach single-mode interconnection
- 400G Ethernet storage network
FAQ
Q: What is 400GBASE-DR4 used for?
A: DR4 is a parallel single-mode 400G interface, mainly for 500m rack-to-rack links inside data centers, different from FR4/LR4 long-reach modules.
Q: Can I use this module on QSFP-DD port of Arista / Cisco switches?
A: It follows standard 400GBASE-DR4 protocol. Compatibility depends on whether your switch allows third-party optics and supports DR4 profile, check host whitelist first.
Q: What is the difference between PC and APC MPO12?
A: PC is flat polish for short reach data center links; APC is angled 8° polish, typically used for passive optical networks. We provide APC version upon request.
Q: Can I use OM4 multimode fiber for this DR4 module?
A: No, DR4 is single-mode module, must use OS2 single-mode fiber.
