25G DWDM 10km CH34 1550nm SFP+ Transceiver
Features
- Supports up to 25.78Gbps bit rates
- Hot-pluggable SFP+ footprint
- 1310nm DFB laser and PIN photodiode, Up to 10km for SMF transmission
- Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle
- Compatible with RoHS
- Single +3.3V power supply
- Real Time Digital Diagnostic Monitoring
- Operating case temperature:
Standard: 0 to +70°C
Description
The SFP28 transceivers are high performance, cost effective modules supporting data rate of 25.78Gbps and 10km transmission distance with SMF.
The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics functions.
Absolute Maximum Ratings
|
Parameter |
Symbol |
Min |
Max |
Unit |
|
Supply Voltage |
Vcc |
-0.5 |
4.5 |
V |
|
Storage Temperature |
Ts |
-40 |
+85 |
°C |
|
Operating Humidity |
- |
5 |
85 |
% |
Recommended Operating Conditions
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Operating Case Temperature |
Tc |
0 |
|
+70 |
°C |
|
Power Supply Voltage |
Vcc |
3.135 |
3.30 |
3.465 |
V |
|
Power Supply Current |
Icc |
|
|
400 |
mA |
|
Data Rate |
|
|
25.78 |
|
Gbps |
Optical and Electrical Characteristics
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
||
|
Transmitter |
||||||||
|
Centre Wavelength |
λc |
1270 |
1310 |
1350 |
nm |
|
||
|
Spectral Width（-20dB） |
Δλ |
|
|
1 |
nm |
|
||
|
Side-Mode Suppression Ratio |
SMSR |
30 |
- |
|
dB |
|
||
|
Average Output Power |
Pout |
-7 |
|
2 |
dBm |
1 |
||
|
Extinction Ratio |
ER |
3.5 |
|
|
dB |
|
||
|
Data Input Swing Differential |
VIN |
180 |
|
850 |
mV |
2 |
||
|
Input Differential Impedance |
ZIN |
90 |
100 |
110 |
Ω |
|
||
|
TX Disable |
Disable |
|
2.0 |
|
Vcc |
V |
|
|
|
Enable |
|
0 |
|
0.8 |
V |
|
||
|
TX Fault |
Fault |
|
2.0 |
|
Vcc |
V |
|
|
|
Normal |
|
0 |
|
0.8 |
V |
|
||
|
Receiver |
||||||||
|
Centre Wavelength |
λc |
1260 |
|
1600 |
nm |
|
||
|
Receiver Sensitivity |
|
|
|
-13.3 |
dBm |
3 |
||
|
Receiver Overload |
|
|
|
2 |
dBm |
3 |
||
|
LOS De-Assert |
LOSD |
|
|
-15 |
dBm |
|
||
|
LOS Assert |
LOSA |
-30 |
|
|
dBm |
|
||
|
LOS Hysteresis |
|
0.5 |
|
|
dB |
|
||
|
Data Output Swing Differential |
Vout |
300 |
|
900 |
mV |
4 |
||
|
LOS |
High |
2.0 |
|
Vcc |
V |
|
||
|
Low |
|
|
0.8 |
V |
|
|||
Notes:
- The optical power is launched into SMF.
- PECL input, internally AC-coupled and terminated.
- Measured with a PRBS 231-1 test pattern @25.78Gps, BER ≤5×10-5.
- Internally AC-coupled.
Timing and Electrical
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Tx Disable Negate Time |
t_on |
|
|
2 |
ms |
|
Tx Disable Assert Time |
t_off |
|
|
100 |
µs |
|
Time To Initialize, including Reset of Tx Fault |
t_init |
|
|
300 |
ms |
|
Tx Fault Assert Time |
t_fault |
|
|
100 |
µs |
|
Tx Disable To Reset |
t_reset |
10 |
|
|
µs |
|
LOS Assert Time |
t_loss_on |
|
|
100 |
µs |
|
LOS De-assert Time |
t_loss_off |
|
|
100 |
µs |
|
Serial ID Clock Rate |
f_serial_clock |
|
100 |
400 |
KHz |
|
MOD_DEF (0:2)-High |
VH |
2 |
|
Vcc |
V |
|
MOD_DEF (0:2)-Low |
VL |
|
|
0.8 |
V |
Diagnostics
|
Parameter |
Range |
Unit |
Accuracy |
Calibration |
|
Temperature |
0 to +70 |
°C |
±3°C |
Internal |
|
Voltage |
3.0 to 3.6 |
V |
±3% |
Internal |
|
Bias Current |
0 to 100 |
mA |
±10% |
Internal |
|
TX Power |
-7 to 2 |
dBm |
±3dB |
Internal |
|
RX Power |
-14 to +2 |
dBm |
±3dB |
Internal |
Digital Diagnostic Memory Map
The transceivers provide serial ID memory contents and diagnostic information about the present operating conditions by the 2-wire serial interface (SCL, SDA).
The diagnostic information with internal calibration or external calibration all are implemented, including received power monitoring, transmitted power monitoring, bias current monitoring, supply voltage monitoring and temperature monitoring.
Related products
$0.00
FINISAR FTLX8574D3BCL 10G Multimode SFP+ Optica...
Product Description The FINISAR FTLX8574D3BCL is a 10Gbps SFP+ optical transceiver compliant with...
Product Description The FINISAR FTLX8574D3BCL is a 10Gbps SFP+ optical transceiver compliant with the 10GBASE-SR standard. It uses an 850nm VCSEL laser and is designed for short-distance high-speed data transmission over multi-mode fiber (MMF). Equipped with dual LC duplex connectors, it supports hot-swapping and Digital Diagnostic Monitoring (DDM), making it a core connectivity component for short-range 10G links between switches/servers in data centers and enterprise networks. Key Specific...
$0.00
FINISAR FTLC9558REPM 100G SR4 Multimode QSFP28 ...
Product Description The FINISAR FTLC9558REPM is a 100Gbps QSFP28 optical transceiver compliant wi...
Product Description The FINISAR FTLC9558REPM is a 100Gbps QSFP28 optical transceiver compliant with the 100GBASE-SR4 standard. It uses an 850nm VCSEL laser array and adopts 4-lane 25Gbps parallel optical transmission technology, designed for short-distance high-density 100G data transmission over multi-mode fiber (MMF). Equipped with an MPO/MTP 12-fiber interface, it supports hot-swapping and Digital Diagnostic Monitoring (DDM), making it a core component for short-range 100G bandwidth interc...
$0.00
Finisar FCLF8522P2BTL Industrial-grade Gigabit ...
Product Description The Finisar FCLF8522P2BTL is an industrial-grade gigabit active copper SFP tr...
Product Description The Finisar FCLF8522P2BTL is an industrial-grade gigabit active copper SFP transceiver designed for Gigabit Ethernet connectivity in industrial environments. It converts an SFP port on a device to an RJ45 electrical port, supporting 1Gbps data transmission over Cat5e/Cat6 twisted-pair cables. With a wide operating temperature range, it is a core component for expanding gigabit electrical ports in harsh scenarios like industrial networks and outdoor device interconnections....
$0.00
Finisar FTLX1475D3BCL 10 Gigabit Single-Mode Du...
Product Description The Finisar FTLX1475D3BCL is a 10Gbps SFP+ optical transceiver compliant with...
Product Description The Finisar FTLX1475D3BCL is a 10Gbps SFP+ optical transceiver compliant with the 10GBASE-LR standard. It uses a 1310nm wavelength laser and is designed for long-distance 10G data transmission over single-mode fiber (SMF). Equipped with a dual LC duplex (dual-core) interface, it supports hot-swapping and Digital Diagnostic Monitoring (DDM), making it a core connectivity component for long-range 10G link scenarios such as enterprise cross-building interconnects and metro ac...