Features
* Data-rate of 155Mbps operation
* 18 CWDM DFB wavelengths laser and PIN photodetector for 80km transmission
* Compliant with SFP MSA and SFF-8472 with duplex LC receptacle
* Digital Diagnostic Monitoring:
Internal Calibration or External Calibration
* Compatible with SONET OC-24-LR-1
* Compatible with RoHS
* +3.3V single power supply
* Operating case temperature: 0 to +70°C/-40~85°C
Applications
* Gigabit Ethernet
* Fiber Channel/STM-1
* Switch to Switch interface
* Switched backplane applications
* Router/Server interface
* Other optical transmission systems
Description
The SFP transceivers are high performance, cost effective modules supporting data-rate of 155Mbps and 80km transmission distance with SMF.
The transceiver consists of three sections: a uncooled CWDM DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.
Absolute Maximum Ratings
Table 1 - Absolute Maximum Ratings
Parameter |
Symbol |
Min |
Max |
Unit |
Supply Voltage |
Vcc |
-0.5 |
4.5 |
V |
Storage Temperature |
Ts |
-40 |
+85 |
°C |
Operating Humidity |
- |
5 |
85 |
% |
Recommended Operating Conditions
Table 2 - Recommended Operating Conditions
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Operating Case Temperature |
Standard |
Tc |
0 |
|
+70 |
°C |
Power Supply Voltage |
Vcc |
3.13 |
3.3 |
3.47 |
V |
|
Power Supply Current |
Icc |
|
|
300 |
mA |
|
Data Rate |
|
|
1.25 |
|
Gbps |
Table3 -λC Wavelength Guide
λC Wavelength Guide |
|||||||||||
Code |
λC |
Unit |
Code |
λC |
Unit |
Code |
λC |
Unit |
Code |
λC |
Unit |
27 |
1270 |
nm |
37 |
1370 |
nm |
47 |
1470 |
nm |
57 |
1570 |
nm |
29 |
1290 |
nm |
39 |
1390 |
nm |
49 |
1490 |
nm |
59 |
1590 |
nm |
31 |
1310 |
nm |
41 |
1410 |
nm |
51 |
1510 |
nm |
61 |
1610 |
nm |
33 |
1330 |
nm |
43 |
1430 |
nm |
53 |
1530 |
nm |
|
|
|
35 |
1350 |
nm |
45 |
1450 |
nm |
55 |
1550 |
nm |
|
|
|
Table 4 - Optical and Electrical Characteristics
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
||
Transmitter |
||||||||
Centre Wavelength |
λc |
λc-6.5 |
λc |
λc+6.5 |
nm |
|
||
Spectral Width (-20dB) |
∆λ |
|
|
1 |
nm |
|
||
Side Mode Suppression Ratio |
SMSR |
30 |
|
|
dB |
|
||
Average Output Power |
Pout |
0 |
|
5 |
dBm |
1 |
||
Extinction Ratio |
ER |
9 |
|
|
dB |
|
||
Optical Rise/Fall Time (20%~80%) |
tr/tf |
|
|
0.26 |
ns |
|
||
Data Input Swing Differential |
VIN |
400 |
|
1800 |
mV |
2 |
||
Input Differential Impedance |
ZIN |
90 |
100 |
110 |
Ω |
|
||
TX Disable |
Disable |
|
2.0 |
|
Vcc |
V |
|
|
Enable |
|
0 |
|
0.8 |
V |
|
||
TX Fault |
Fault |
|
2.0 |
|
Vcc |
V |
|
|
Normal |
|
0 |
|
0.8 |
V |
|
||
Receiver |
||||||||
Receiver Sensitivity |
|
|
|
-23 |
dBm |
3 |
||
Receiver Overload |
|
-3 |
|
|
dBm |
3 |
||
LOS De-Assert |
LOSD |
|
|
-24 |
dBm |
|
||
LOS Assert |
LOSA |
-30 |
|
|
dBm |
|
||
LOS Hysteresis |
|
1 |
|
4 |
dB |
|
||
Data Output Swing Differential |
Vout |
370 |
|
1800 |
mV |
4 |
||
LOS |
High |
2.0 |
|
Vcc |
V |
|
||
Low |
|
|
0.8 |
V |
|
Notes:
Timing and Electrical
Table 5 - Timing and Electrical
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Tx Disable Negate Time |
t_on |
|
|
1 |
ms |
Tx Disable Assert Time |
t_off |
|
|
10 |
µs |
Time To Initialize, including Reset of Tx Fault |
t_init |
|
|
300 |
ms |
Tx Fault Assert Time |
t_fault |
|
|
100 |
µs |
Tx Disable To Reset |
t_reset |
10 |
|
|
µs |
LOS Assert Time |
t_loss_on |
|
|
100 |
µs |
LOS De-assert Time |
t_loss_off |
|
|
100 |
µs |
Serial ID Clock Rate |
f_serial_clock |
|
|
400 |
KHz |
MOD_DEF (0:2)-High |
VH |
2 |
|
Vcc |
V |
MOD_DEF (0:2)-Low |
VL |
|
|
0.8 |
V |
Diagnostics
Table 5 – Diagnostics Specification
Parameter |
Range |
Unit |
Accuracy |
Calibration |
Temperature |
0 to +70 |
°C |
±3°C |
Internal / External |
Voltage |
3.0 to 3.6 |
V |
±3% |
Internal / External |
Bias Current |
0 to 100 |
mA |
±10% |
Internal / External |
TX Power |
0 to +5 |
dBm |
±3dB |
Internal / External |
RX Power |
-23 to -3 |
dBm |
±3dB |
Internal / External |
Digital Diagnostic Memory Map
The transceivers provide serial ID memory contents and diagnostic information about the present operating conditions by the 2-wire serial interface (SCL, SDA).
The diagnostic information with internal calibration or external calibration all are implemented, including received power monitoring, transmitted power monitoring, bias current monitoring, supply voltage monitoring and temperature monitoring
Ordering information
Part Number |
Product Description |
BT-OC3-80xxxx |
155Mbps CWDM 80km LC SFP 0~70℃ |
xxxx= Wavelength 1270~1610nm, with a 20nm step.