100Gbps Single Mode 10KM QSFP28 Transceiver
100Gbps Single Mode 10KM QSFP28 Transceiver
Description
The100Gb/s QSFP28 LR4 transceiver is compliant with the QSFP28 MSA and IEEE 802.3ba. QSFP28 LR4 transceiver modules are designed for use in 100 Gigabit Ethernet interfaces over single mode fiber.
Feature
- Hot-pluggable QSFP28 form factor
- Supports 103.1Gb/s aggregate bit rates
- Maximum link length of 10km on Single Mode Fiber (SMF)
- Power dissipation < 3.5W
- Built-in digital diagnostic functions
- Built-in CIDR
- 4x278Gb/s DFB-based LAN-WDM transmitter
- Duplex LC receptacles
- Single3V power supply
- RoHS compliant
Operating case temperature: 0~+70°C
Application
100GBASE-LR4 100G Ethernet
Absolute Maximum Ratings(TC=25°C, UNLESS OTHERWISE NOTED)
Module performance is not guaranteed beyond the operating range.
Exceeding the limits below may damage the transceiver module permanently.
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
|
Storage Temperature |
Ts |
-40 |
- |
+85 |
ºC |
|
|
Maximum Supply Voltage |
Vcc |
-0.3 |
- |
3.6 |
V |
|
|
Operating Relative Humidity |
RH |
15 |
- |
+85 |
% |
Recommended Operating Conditions
Parameter Symbol Min Typical Max Unit Notes
Data Rate DR 25.78±100ppm Gb/s 1
Bit Error Rate-25.78Gb/s BER 1E-12 2
Operating Case Temperature Tcase 0 70 ºC
Fiber Length on SMF L 10 km
Notes:
1. Supports 100GBASE-LR4 per IEEE 802.3ba.
2. Tested with a 231 – 1 PRBS.
Optical Specification
|
Parameter |
Symbol |
Min |
Typical |
Max |
Units |
Notes |
||||||||
|
Transmitter |
||||||||||||||
|
Signaling rate per lane |
|
25.78125±100ppm |
Gb/s |
1 |
||||||||||
|
Center wavelength |
λ |
1294.53 – 1296.59 1299.02 – 1301.09 1303.54 – 1305.63 1308.09 – 1310.19 |
nm |
|
||||||||||
|
Sidemode Suppression ratio |
SMSR |
30 |
|
|
|
|
nm |
|
||||||
|
Transmit OMA per Lane |
TXP |
-1.3 |
|
|
|
4.5 |
dBm |
|
||||||
|
Transmit Average Power per Lane |
Pout |
-4.3 |
|
|
|
4.5 |
dBm |
|
||||||
|
Optical Extinction Ratio |
ER |
4 |
|
|
|
dB |
|
|||||||
|
Average launch power of OFF transmitter, per lane |
|
|
|
|
|
-30 |
dBm |
|
||||||
|
Optical return loss tolerance |
RL |
|
|
|
|
20 |
dB |
|
||||||
|
Relative Intensity Noise |
RIN |
|
|
|
|
-130 |
dB/Hz |
|
||||||
|
Transmitter eye mask definition {X1, X2, X3, Y1, Y2, Y3}
|
|
{0.25, 0.4, 0.45, 0.25, 0.28, 0.4} |
|
2 |
||||||||||
|
Receiver |
|
-130 |
||||||||||||
|
Signaling rate per lane |
|
25.78125±100ppm |
Gb/s |
1 |
||||||||||
|
Center wavelength |
λ |
1294.53 – 1296.59 1299.02 – 1301.09 1303.54 – 1305.63 1308.09 – 1310.19 |
nm |
|
||||||||||
|
Average Receive Power per Lane |
RXP |
-10.6 |
|
4.5 |
dBm |
|
||||||||
|
Receive Power (OMA) per Lane |
RxOMA |
|
|
4.5 |
dBm |
|
||||||||
|
Receiver Reflectance |
Rfl |
|
|
-26 |
dB |
|
||||||||
|
Receive Sensitivity in OMA, each Lane |
SEN |
|
|
-8.6 |
dBm |
|
||||||||
|
LOS De-Assert |
LOSD |
|
|
-11.6 |
dBm |
|
||||||||
|
LOS Assert |
LOSA |
-24 |
|
|
dBm |
|
||||||||
|
LOS Hysteresis |
LOSh |
0.5 |
|
|
dB |
|
||||||||
Notes:
- Transmitter and receiver consists of 4 lasers and photodiode operating at 78Gb/s each for 100GBASE-LR4,
Hit ratio 5E-5.
Ordering information
|
Part Number |
Description |
|
BT-QSFP28-LR4 |
100Gbps QSFP28 LAN WDM4, LC, 10km, 0°C~+70°C, with DDM |
Related products
$850.00 $790.00
100Gb/s QSFP28 ER4 40km Optical Transceiver
Features Hot Pluggable QSFP28 form factor Supports aggregate bit rate up to 103.125Gb/s LC Dupl...
Features Hot Pluggable QSFP28 form factor Supports aggregate bit rate up to 103.125Gb/s LC Duplex optical interface 4x25Gb/s LAN-WDM transmitter, EML laser,APD array detector Operating case temperature:0 to 70 °C Low power consumption <4.5W Applicable for 40km SMF connection without FEC All-metal housing for superior EMI performance IIC management interface Single +3.3V power supply RoHS compliant (lead free) Applications 100G Ethernet Other optical links Standards SFF8436,SFF...
$100.00
100Gbps Multimode 100Meter QSFP28 Transceiver DESCRIPTION The100Gb/s QSFP28 SR4 transceiver is...
100Gbps Multimode 100Meter QSFP28 Transceiver DESCRIPTION The100Gb/s QSFP28 SR4 transceiver is compliant with the QSFP28 MSA and IEEE 802.3bm. QSFP28 SR4 is an assembly of four full-duplex lanes, where each lane is capable of transmitting data at rates up to 25.78Gb/s, providing an aggregated rate of 103.125Gb/s. FEATURESFour-channel full-duplex transceiver25.78Gb/s data rate per channelMaximum link length of 70m on OM3(MMF) ,100m on OM4 (MMF)Power dissipation < 2.5WBuilt-in digital dia...
$2,200.00 $2,100.00
100Gb/s QSFP28 ZR4 Transceiver
Features lCompliant with 100GBASE-ZR4 lSupport line rates from 103.125 Gb/s to 111.81 Gb/s OTU4 l...
Features lCompliant with 100GBASE-ZR4 lSupport line rates from 103.125 Gb/s to 111.81 Gb/s OTU4 lLAN WDM EML laser and PIN receiver with SOA lUp to 80km reach for G.652 SMF lHot pluggable 38 pin electrical interface lQSFP28 MSA compliant lDuplex LC optical receptacle lRoHS-10 compliant and lead-free lSingle +3.3V power supply lMaximum power consumption 6.5W lCase operating temperature Commercial: 0 ~ +70℃ Extended-10 ~ +80℃ Industrial: -40 ~ +85℃ Absolute Maximum Ratings It has to be noted ...