Features
> Dual data-rate of 1.25Gbps/1.063Gbps operation
> 1310nm FP laser and PIN photodetector for 20km transmission
> Compliant with SFP MSA and SFF-8472 with duplex LC receptacle
> Digital Diagnostic Monitoring:
Internal Calibration or External Calibration
> Compatible with SONET OC-24-LR-1
> Compatible with RoHS
> +3.3V single power supply
> Operating case temperature:
Standard : 0 to +70°C
Industrial: -40 to +85°C
Applications
> Gigabit Ethernet
> Fiber Channel
> Switch to Switch interface
> Switched backplane applications
> Router/Server interface
> Other optical transmission systems
Description
The SFP transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 20km transmission distance with SMF.
The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA> and MCU control unit. All modules satisfy class I laser safety requirements.
The transceivers are compatible with SFP Multi-Source Agreement (MSA> and SFF-8472. For further information, please refer to SFP MSA.
Absolute Maximum Ratings
Table 1 - Absolute Maximum Ratings
Parameter |
Symbol |
Min |
Max |
Unit |
Supply Voltage |
Vcc |
-0.5 |
4.5 |
V |
Storage Temperature |
Ts |
-40 |
+85 |
°C |
Operating Humidity |
- |
5 |
85 |
% |
Recommended Operating Conditions
Table 2 - Recommended Operating Conditions
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
||
Operating Case Temperature |
Standard |
Tc |
0 |
|
+70 |
°C |
|
Industrial |
-40 |
|
+85 |
°C |
|||
Power Supply Voltage |
Vcc |
3.13 |
3.3 |
3.47 |
V |
||
Power Supply Current |
Icc |
|
|
300 |
mA |
||
Data Rate |
Gigabit Ethernet |
|
|
1.25 |
|
Gbps |
|
Fiber Channel |
|
|
1.063 |
|
Table 3 - Optical and Electrical Characteristics
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
||
Transmitter |
||||||||
Centre Wavelength |
λc |
1260 |
1310 |
1360 |
nm |
|
||
Spectral Width (RMS) |
∆λ |
|
|
4 |
nm |
|
||
Average Output Power |
Pout |
-9 |
|
-3 |
dBm |
1 |
||
Extinction Ratio |
ER |
9 |
|
|
dB |
|
||
Optical Rise/Fall Time (20%~80%) |
tr/tf |
|
|
0.26 |
ns |
|
||
Data Input Swing Differential |
VIN |
400 |
|
1800 |
mV |
2 |
||
Input Differential Impedance |
ZIN |
90 |
100 |
110 |
Ω |
|
||
TX Disable |
Disable |
|
2.0 |
|
Vcc |
V |
|
|
Enable |
|
0 |
|
0.8 |
V |
|
||
TX Fault |
Fault |
|
2.0 |
|
Vcc |
V |
|
|
Normal |
|
0 |
|
0.8 |
V |
|
||
Receiver |
||||||||
Centre Wavelength |
λc |
1260 |
|
1580 |
nm |
|
||
Receiver Sensitivity |
|
|
|
-23 |
dBm |
3 |
||
Receiver Overload |
|
-3 |
|
|
dBm |
3 |
||
LOS De-Assert |
LOSD |
|
|
-24 |
dBm |
|
||
LOS Assert |
LOSA |
-30 |
|
|
dBm |
|
||
LOS Hysteresis |
|
1 |
|
4 |
dB |
|
||
Data Output Swing Differential |
Vout |
400 |
|
1800 |
mV |
4 |
||
LOS |
High |
2.0 |
|
Vcc |
V |
|
||
Low |
|
|
0.8 |
V |
|
Notes:
4. Internally AC-coupled.
Timing and Electrical
Table 4 - Timing and Electrical
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Tx Disable Negate Time |
t_on |
|
|
1 |
ms |
Tx Disable Assert Time |
t_off |
|
|
10 |
µs |
Time To Initialize, including Reset of Tx Fault |
t_init |
|
|
300 |
ms |
Tx Fault Assert Time |
t_fault |
|
|
100 |
µs |
Tx Disable To Reset |
t_reset |
10 |
|
|
µs |
LOS Assert Time |
t_loss_on |
|
|
100 |
µs |
LOS De-assert Time |
t_loss_off |
|
|
100 |
µs |
Serial ID Clock Rate |
f_serial_clock |
|
|
400 |
KHz |
MOD_DEF (0:2)-High |
VH |
2 |
|
Vcc |
V |
MOD_DEF (0:2)-Low |
VL |
|
|
0.8 |
V |
Diagnostics
Table 5 – Diagnostics Specification
Parameter |
Range |
Unit |
Accuracy |
Calibration |
Temperature |
0 to +70 |
°C |
±3°C |
Internal / External |
-40 to +85 |
||||
Voltage |
3.0 to 3.6 |
V |
±3% |
Internal / External |
Bias Current |
0 to 100 |
mA |
±10% |
Internal / External |
TX Power |
-9 to -3 |
dBm |
±3dB |
Internal / External |
RX Power |
-23 to -3 |
dBm |
±3dB |
Internal / External |