Ericsson RPM 253 FTTA CPRI Fiber Cables: Specs & Connector Guide

When sourcing FTTA CPRI fiber cables for Ericsson radio sites, network engineers and telecom buyers often encounter a wide range of RPM 253 part numbers. All these cables are designed for optical fronthaul connections between baseband equipment and remote radio units in 4G and 5G tower deployments, but connector types vary and must match your existing radio hardware.

This guide covers nine common Ericsson RPM 253 fiber cable models, their connector configurations, IP ratings and typical field applications for your reference.

FTTA Connector Overview: FullAXS, ODC, DLC/FLX and LC

The main difference between RPM 253 variants lies in the connector ends. Each connector is designed for specific outdoor telecom site requirements:

  • FullAXS: A hardened fiber-optic connector interface used in outdoor telecom applications. It is designed for connection to compatible radio equipment. Confirm the exact connector configuration and mating interface before ordering.
  • ODC: An outdoor fiber-optic connector interface used in selected telecom cable assemblies. Check the exact ODC variant and equipment-side compatibility before ordering.
  • DLC/FLX: Connector designations found in certain FTTA cable variants. Verify the exact connector type and mating interface against the manufacturer's product documentation.
  • LC / LCD: A standard duplex LC fiber connector commonly used for optical patching and equipment connections. Outdoor suitability depends on the cable assembly and its environmental protection.

Ericsson RPM 253 Series Fiber Cable Specifications

Part Number Connector A Connector B Fiber Type IP Rating Main Application
RPM 253 1610 FullAXS (DLC/FLX) LC Duplex Single-mode IP67 Fronthaul cable for tower radio site connections, verify radio compatibility before purchase
RPM 253 3512 FullAXS (DLC/FLX) FullAXS (DLC/FLX) Single-mode IP67 Fronthaul fiber assembly for compatible Ericsson radio deployments
RPM 253 4388 ODC/M FullAXS (DLC/FLX) Single-mode IP67 Outdoor fiber assembly for selected harsh telecom sites
RPM 253 0292 FullAXS (DLC/FLX) FullAXS (DLC/FLX) Single-mode IP67 Dual-fiber fronthaul cable for compatible Ericsson radio units
RPM 253 1619 FullAXS (DLC/FLX) LC Duplex Single-mode IP65 Fronthaul cable, suitable for compatible outdoor CPRI connections (2 fibers)
RPM 253 1633 LC Duplex LC Duplex Single-mode To confirm FTTA jumper for radio site deployment, verify specs before ordering
RPM 253 3577 FullAXS (DLC/FLX) FullAXS (DLC/FLX) Single-mode IP67 Outdoor fiber connection for compatible Ericsson radio equipment
RPM 253 2891 Verify against physical label Verify against physical label Single-mode To confirm FTTA cable, please check cable label before ordering
RPM 253 4692 FullAXS (DLC/FLX) ODC/F Single-mode IP67 ODC FTTA fronthaul cable for selected tower sites, confirm compatibility and environmental suitability

Important note for procurement: IP protection ratings may vary by cable assembly and connector configuration. Do not assume that all Ericsson RPM 253 variants share the same IP rating. Please check the manufacturer's datasheet or physical product label to confirm the exact IP rating before ordering. These fiber cables are not interchangeable, many RPM 253 part numbers have multiple sub-versions with different connector configurations.

Ericsson RPM 253 FTTA Fiber Cable Models and Connector Types

When To Choose RPM 253 FTTA Fiber Cables

  • Use compatible RPM 253 fiber cable assemblies for optical fronthaul connections between baseband equipment and remote radio units, suitable for CPRI or eCPRI applications where supported by the connected equipment.
  • Select ODC variants for sites with extreme temperature fluctuation and vibration, subject to equipment compatibility.
  • Select FullAXS / DLC/FLX variants for compatible modern Ericsson radio hardware.
  • RPM 253 3512, RPM 253 0292 and RPM 253 3577 are listed as FullAXS-to-FullAXS variants in this guide. Confirm their specific applications and equipment compatibility before ordering.

Compatibility Reminder

Compatibility depends on the specific Ericsson radio model, optical interface and cable connector configuration. Not all RPM 253 variants are interchangeable. Please provide your radio model and required connector type so we can help verify the correct cable assembly before purchase.

Spare-Part Supply

Skyward Telecom has small stock of these RPM 253 fiber cables at competitive prices for urgent maintenance and replacement orders. For large telecom project orders, custom lengths are available with direct factory shipment.

If you are sourcing Ericsson FTTA fiber cables or other radio spare parts, browse our full selection:

Ericsson Telecom Spare Parts Collection

Reach out to us with your part numbers for stock check and quotation.

Voltar para o blogue

Deixe um comentário