Ericsson Cable RPM 253 1633 series
Ericsson Cable RPM 253 1633 series
1000 en existencias
Vendor: Skyward Telecom
Share
Collapsible row
Collapsible row
Our Services
- Cost-effective equipment
- Faster delivery
- Worldwide shipping
- Alternative supply
- Sample service
- Test and warranty
Ericsson Cable RPM 253 1633 | LC Duplex to LC Duplex FTTA Single-Mode Fiber Jumper
FTTA Single-Mode Fiber Patch Cord for Indoor / Enclosure CPRI / eCPRI Fronthaul Links
Quick Navigation
Product Overview
The Ericsson RPM 253 1633 is a standard duplex LC-LC single-mode fiber jumper designed for fiber-to-the-antenna (FTTA) CPRI / eCPRI fronthaul connections within base station cabinets, enclosures or shelter environments.
Unlike FullAXS sealed cable assemblies, this variant uses standard LC duplex connectors on both ends. It is commonly used for internal patching between radio modules and optical distribution points, not intended for direct exposed tower outdoor installation.
This model belongs to Ericsson RPM 253 FTTA cable series. Please check the connector configuration and equipment compatibility before placing your order.
Product Category & Related Models:
Ericsson Cables | Fiber Optic Cables | RPM 253 1610 | RPM 253 1619 | FTTA Cables | Fiber Patch Cords
Technical Specifications
| Brand | Ericsson |
|---|---|
| Model | RPM 253 1633 |
| Product Type | LC Duplex Fiber Patch Jumper |
| Application | FTTA / CPRI / eCPRI Fronthaul Patching |
| Fiber Type | Single-Mode Fiber |
| Connector A | LC Duplex |
| Connector B | LC Duplex |
| Grounding Wire | Not included |
| Protection Rating | To confirm, standard LC connectors are non-sealed |
| Jacket Material | LSZH |
| Operating Temperature | -40°C to +85°C |
| Available Lengths | Limited stock for standard lengths; custom lengths supported for bulk projects |
| Product Condition | New, confirm stock before order |
| Warranty | 12-month warranty, subject to sales terms |
Note: Specifications should be cross-checked against the actual product label or manufacturer datasheet before ordering. Standard LC connectors are not sealed for direct outdoor exposure.
Key Features
1. Standard Duplex LC to LC Interface
Equipped with standard LC duplex connectors on both ends. This is a common patching jumper for internal cabinet connections, not a sealed outdoor FullAXS cable assembly.
2. Single-Mode Optical Transmission
Single-mode fiber construction supports CPRI / eCPRI fronthaul signals for 4G and 5G radio networks, subject to compatibility with connected radio and optical equipment.
3. LSZH Cable Jacket
Low smoke zero halogen jacket, suitable for deployment inside cabinets, shelters and enclosed telecom equipment rooms.
4. Flexible Internal Patching
Compact and flexible, designed for short-range optical patching inside base station enclosures. It does not include grounding wire for tower lightning protection.
Typical Applications
- FTTA CPRI / eCPRI fronthaul patching inside base station cabinets
- Internal optical jumper connections for radio and distribution units
- Telecom shelter & enclosure fiber interconnection
- 4G / 5G base station maintenance and spare replacement
This jumper is not designed for direct exposed outdoor tower installation. Please verify the required connector type, fiber count, cable length and installation environment before ordering.
Our Services
Model Selection Support
We help verify model numbers, connector types, cable lengths and stock availability for your telecom projects.
Pre-Shipment Optical Inspection
Optical testing is performed before shipment. Test reports and photos can be provided upon request.
Worldwide Shipping
Global shipping available for samples, spare orders and large engineering projects.
After-Sales Support
Reach out for product consultation, order tracking and after-sales assistance. Warranty terms follow formal sales agreement.
Frequently Asked Questions
Q1. What is Ericsson RPM 253 1633?
Ericsson RPM 253 1633 is a single-mode LC duplex to LC duplex fiber jumper from the RPM 253 FTTA cable series, used for internal cabinet CPRI / eCPRI fronthaul patching.
Q2. What are the connector types of this cable?
Standard configuration: LC Duplex on both ends. It does not use sealed FullAXS connectors. Confirm with product photos before ordering.
Q3. What is the difference between RPM 253 1633 and RPM 253 1619?
RPM 253 1633 is LC-LC standard jumper for indoor/enclosure patching, no grounding wire. RPM 253 1619 is FullAXS-LC outdoor cable assembly with grounding wire for tower installation.
Q4. Does RPM 253 1633 come with grounding wire?
No, this LC-LC jumper does not include grounding wire. Grounding wire is featured on sealed FullAXS variants for outdoor tower use.
Q5. Can RPM 253 1633 be mounted directly on tower outdoors?
Not recommended. Standard LC connectors are non-sealed. This cable is intended for cabinet or shelter internal patching only.
Q6. Are different cable lengths available?
Standard lengths have limited stock. Custom lengths are supported for bulk telecom project orders.
Q7. How can I confirm whether this cable is compatible with my equipment?
Send us your radio model, required connector types, target length and installation environment. Our team will verify compatibility for you.
Important Ordering Reminder
Before purchasing, please confirm the model number, fiber count, connector configuration, cable length and installation environment. Standard LC connectors are not sealed for direct outdoor exposure. If unsure, send us your requirements or product label photos for confirmation.
Contact Us for a Quote
Looking for Ericsson RPM 253 1633 fiber jumpers for your telecom project? Contact our team for product availability, pricing and shipping information.
Send us your required quantity, cable length and destination. We will get back to you with available options.
