Zu Produktinformationen springen
1 von 1

400G QSFP-DD DR4 Optical Transceiver, 1310nm, SMF, 500m, MPO12, 400GBASE-DR4

400G QSFP-DD DR4 Optical Transceiver, 1310nm, SMF, 500m, MPO12, 400GBASE-DR4

300 auf Lager

Vendor: Skyward Telecom

Collapsible row

Our Services  

  •  Cost-effective equipment
  •  Faster delivery
  •  Worldwide shipping
  •  Alternative supply 
  •  Sample service
  •  Test and warranty

Our 400G QSFP-DD DR4 optical transceiver is a high-performance single-mode parallel module built for 400GBASE-DR4 Ethernet data center links. Designed for rack-to-rack and leaf-spine interconnection up to 500 meters over OS2 single-mode fiber.

Key Specifications

Form Factor QSFP-DD
Data Rate 400Gbps (4×100G PAM4)
Wavelength 1310nm, EML
Fiber Type Single Mode Fiber (OS2 SMF)
Transmission Distance 500m
Connector MPO12 (PC end-face, APC available upon request)
Working Temp 0℃ ~ 70℃
Diagnostic DDM / Digital Diagnostics Monitoring

Compatibility List

Follows the IEEE 802.3bs 400GBASE-DR4 and QSFP-DD MSA standard. It works with network switches, routers and adapters equipped with QSFP-DD ports that accept generic compliant transceivers. Please confirm your host device transceiver whitelist and 400G DR4 support before ordering.

Core Advantages

  • ✅ Hot-pluggable QSFP-DD design, easy installation and replacement
  • ✅ Stable parallel 4-lane 100G PAM4 signal for 500m single-mode links
  • ✅ Strictly 100% tested before shipment, stable for long-term running
  • ✅ Compliant with CMIS, IEEE 802.3bs and QSFP-DD MSA specifications
  • ✅ RoHS compliant, low power consumption
  • ✅ DDM function, real-time monitoring of temperature, power, voltage

Typical Applications

  • Data center leaf-spine switching interconnection
  • AI cluster, HPC high-speed computing network
  • Rack-to-rack 400G short-reach single-mode interconnection
  • 400G Ethernet storage network

FAQ

Q: What is 400GBASE-DR4 used for?
A: DR4 is a parallel single-mode 400G interface, mainly for 500m rack-to-rack links inside data centers, different from FR4/LR4 long-reach modules.

Q: Can I use this module on QSFP-DD port of Arista / Cisco switches?
A: It follows standard 400GBASE-DR4 protocol. Compatibility depends on whether your switch allows third-party optics and supports DR4 profile, check host whitelist first.

Q: What is the difference between PC and APC MPO12?
A: PC is flat polish for short reach data center links; APC is angled 8° polish, typically used for passive optical networks. We provide APC version upon request.

Q: Can I use OM4 multimode fiber for this DR4 module?
A: No, DR4 is single-mode module, must use OS2 single-mode fiber.

Vollständige Details anzeigen