CFP vs CFP2 vs CFP4: What’s the Difference?

CFP vs CFP2 vs CFP4: Key Differences

Choosing the right 100G optical transceiver form factor matters for your network upgrade.

CFP, CFP2 and CFP4 all support 100G transmission, but they differ greatly in size, power and port density.

CFP vs CFP2 vs CFP4

CFP CFP2 CFP4
Size Largest Mid-size Smallest
Max Rate 100G 100G (DCO 200G/400G) 100G
Typical Power 24–32W 7–12W ≤6W
Typical Use Legacy transport, OTN High-density router,
DCO coherent option
High-density 100G
data center

Smaller size → Higher port density · Lower power → Better for dense 100G deployments

Specifications CFP CFP2 CFP4
Size Largest Mid-size Smallest
Max Rate 100G 100G 100G
Typical Power 24–32W 7–12W ≤6W
Typical Use Legacy transport, OTN High-density router, DCO coherent option High-density 100G data center

CFP Transceivers

CFP is the original 100G form factor.

It is bulky with higher power draw.

It is widely used on older optical transport platforms.

View CFP Transceivers →

CFP2 Transceivers

CFP2 shrinks the footprint and cuts power consumption.

Standard CFP2 supports 100G. CFP2-DCO (digital coherent) variants can support 200G/400G for long-haul DCI applications.

It balances density and performance for modern core routers.

View CFP2 Transceivers →

CFP4 Transceivers

CFP4 is the smallest of the three.

Low power design lets you fit more ports on a line card.

It is the preferred option for high-density 100G data center fabrics.

View CFP4 Transceivers →

Skyward Telecom CFP Series

Our CFP, CFP2 and CFP4 modules are multi-brand compatible.

Compatible with Cisco, Huawei, Dell, HP, Nokia/Alcatel, Ericsson, Juniper, Mellanox/NVIDIA, Fortinet, Intel.

Every unit is 100% tested for stable plug-and-play operation.

We keep large stock for telecom, data center and enterprise network projects.

FAQ

Q: Can CFP, CFP2 and CFP4 plug into the same port?

A: No. They have different mechanical footprints and are not interchangeable.

Q: Which one gives the highest port density?

A: CFP4. Its compact size supports the most ports per line card.

Q: Can I use a CFP2-DCO in a standard CFP2 port?

A: It depends. The host line card must support coherent DCO functions. Always verify your hardware specifications before ordering.

Q: Which form factor is for legacy OTN transport?

A: CFP is the common choice for older OTN and optical transport systems.

Need quotation or technical verification?

Send us your part list, we provide quick quotation, specification confirmation and global shipping support.

WhatsApp: +86 15580928694

Email: Lucy@skywardtel.com

Back to blog

Leave a comment