SFP28-25G-1310-10km Transceiver
Features
- Supports up to 25.78Gbps bit rates
- Hot-pluggable SFP+ footprint
- 1310nm DFB laser and PIN photodiode, Up to 10km for SMF transmission
- Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle
- Compatible with RoHS
- Single +3.3V power supply
- Real-Time Digital Diagnostic Monitoring
- Operating case temperature:
Standard: 0 to +70°C
Applications
25GBASE-LR
Description
The SFP28 transceivers are high-performance, cost-effective modules supporting a data rate of 25.78Gbps and 10km transmission distance with SMF.
The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics functions.
Absolute Maximum Ratings
|
Parameter |
Symbol |
Min |
Max |
Unit |
|
Supply Voltage |
Vcc |
-0.5 |
4.5 |
V |
|
Storage Temperature |
Ts |
-40 |
+85 |
°C |
|
Operating Humidity |
- |
5 |
85 |
% |
Recommended Operating Conditions
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Operating Case Temperature |
Tc |
0 |
|
+70 |
°C |
|
Power Supply Voltage |
Vcc |
3.135 |
3.30 |
3.465 |
V |
|
Power Supply Current |
Icc |
|
|
400 |
mA |
|
Data Rate |
|
|
25.78 |
|
Gbps |
Optical and Electrical Characteristics
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
||
|
Transmitter |
||||||||
|
Centre Wavelength |
λc |
1270 |
1310 |
1350 |
nm |
|
||
|
Spectral Width（-20dB） |
Δλ |
|
|
1 |
nm |
|
||
|
Side-Mode Suppression Ratio |
SMSR |
30 |
- |
|
dB |
|
||
|
Average Output Power |
Pout |
-7 |
|
2 |
dBm |
1 |
||
|
Extinction Ratio |
ER |
3.5 |
|
|
dB |
|
||
|
Data Input Swing Differential |
VIN |
180 |
|
850 |
mV |
2 |
||
|
Input Differential Impedance |
ZIN |
90 |
100 |
110 |
Ω |
|
||
|
TX Disable |
Disable |
|
2.0 |
|
Vcc |
V |
|
|
|
Enable |
|
0 |
|
0.8 |
V |
|
||
|
TX Fault |
Fault |
|
2.0 |
|
Vcc |
V |
|
|
|
Normal |
|
0 |
|
0.8 |
V |
|
||
|
Receiver |
||||||||
|
Centre Wavelength |
λc |
1260 |
|
1600 |
nm |
|
||
|
Receiver Sensitivity |
|
|
|
-13.3 |
dBm |
3 |
||
|
Receiver Overload |
|
|
|
2 |
dBm |
3 |
||
|
LOS De-Assert |
LOSD |
|
|
-15 |
dBm |
|
||
|
LOS Assert |
LOSA |
-30 |
|
|
dBm |
|
||
|
LOS Hysteresis |
|
0.5 |
|
|
dB |
|
||
|
Data Output Swing Differential |
Vout |
300 |
|
900 |
mV |
4 |
||
|
LOS |
High |
2.0 |
|
Vcc |
V |
|
||
|
Low |
|
|
0.8 |
V |
|
|||
Notes:
- The optical power is launched into SMF.
- PECL input, internally AC-coupled and terminated.
- Measured with a PRBS 231-1 test pattern @25.78Gps, BER ≤5×10-5.
- Internally AC-coupled.
Timing and Electrical
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Tx Disable Negate Time |
t_on |
|
|
2 |
ms |
|
Tx Disable Assert Time |
t_off |
|
|
100 |
µs |
|
Time To Initialize, including Reset of Tx Fault |
t_init |
|
|
300 |
ms |
|
Tx Fault Assert Time |
t_fault |
|
|
100 |
µs |
|
Tx Disable To Reset |
t_reset |
10 |
|
|
µs |
|
LOS Assert Time |
t_loss_on |
|
|
100 |
µs |
|
LOS De-assert Time |
t_loss_off |
|
|
100 |
µs |
|
Serial ID Clock Rate |
f_serial_clock |
|
100 |
400 |
KHz |
|
MOD_DEF (0:2)-High |
VH |
2 |
|
Vcc |
V |
|
MOD_DEF (0:2)-Low |
VL |
|
|
0.8 |
V |
Diagnostics
|
Parameter |
Range |
Unit |
Accuracy |
Calibration |
|
Temperature |
0 to +70 |
°C |
±3°C |
Internal |
|
Voltage |
3.0 to 3.6 |
V |
±3% |
Internal |
|
Bias Current |
0 to 100 |
mA |
±10% |
Internal |
|
TX Power |
-7 to 2 |
dBm |
±3dB |
Internal |
|
RX Power |
-14 to +2 |
dBm |
±3dB |
Internal |
Digital Diagnostic Memory Map
The transceivers provide serial ID memory contents and diagnostic information about the present operating conditions by the 2-wire serial interface (SCL, SDA).
The diagnostic information with internal calibration or external calibration all are implemented, including received power monitoring, transmitted power monitoring, bias current monitoring, supply voltage monitoring and temperature monitoring.
Related products
$0.00
Ericsson RDH 102 413/33 (RTXM228-524-C24) 10G C...
Product Description The Ericsson RDH 102 413/33 is a high-performance 10G CWDM SFP+ optical trans...
Product Description The Ericsson RDH 102 413/33 is a high-performance 10G CWDM SFP+ optical transceiver designed for medium-reach 10Gbps fiber communications in telecom and wireless infrastructure environments. It operates at 10Gbps using a 1330nm CWDM wavelength over single-mode fiber (SMF), supporting both CPRI (for wireless fronthaul/backhaul) and 10GBASE-LR (for Ethernet) protocols. Delivering reliable transmission up to 10km via duplex LC connectors, this hot-pluggable module is fully qu...
$0.00
Ericsson RDH 102 75/3 R1A (RTXM330-201-C24) 25G...
Product Description The Ericsson RDH 102 75/3 R1A is a high-performance 25G SFP28 optical transce...
Product Description The Ericsson RDH 102 75/3 R1A is a high-performance 25G SFP28 optical transceiver designed for medium-reach 25Gbps fiber communications in 5G telecom and wireless infrastructure environments. It operates at 25GBASE-LR I-Temp with a 1310nm wavelength over single-mode fiber (SMF), delivering reliable transmission up to 10km via duplex LC connectors. This hot-pluggable module is fully qualified for Ericsson networking platforms and features an industrial temperature range (-4...
$0.00
Ericsson RDH 102 75/2 R1A (SP-25E-LR-IDFP-EN) 2...
Product Description The Ericsson RDH 102 75/2 R1A is a high-performance 25G SFP28 optical transce...
Product Description The Ericsson RDH 102 75/2 R1A is a high-performance 25G SFP28 optical transceiver engineered for long-reach 25Gbps fiber communications in next-gen 5G telecom and wireless infrastructure environments. Operating at 25GBASE-LR Lite with a 1310nm wavelength over single-mode fiber (SMF), it delivers stable, carrier-grade transmission up to 10km via duplex LC connectors. This hot-swappable module is fully qualified for Ericsson’s Radio System (ERS) and router platforms, support...
$0.00
Ericsson L-SFP-1003-281/1 (RTXM330-214) 25G BID...
Product Description The Ericsson L-SFP-1003-281/1 is a high-performance 25G BIDI (Bi-directional)...
Product Description The Ericsson L-SFP-1003-281/1 is a high-performance 25G BIDI (Bi-directional) SFP28 optical transceiver designed for short-to-medium reach 25Gbps fiber communications in telecom and wireless 5G fronthaul/backhaul environments. It operates at 25Gbps using bi-directional wavelength transmission over single-mode fiber (SMF), delivering reliable transmission up to 10km via simplex LC connectors. This hot-pluggable module is fully qualified for Ericsson networking platforms, su...