2.488Gbps SFP Optical Transceiver, 2km Reach
ST-OC48-02
2.488Gbps SFP Optical Transceiver, 2km Reach
Features
* Up to 2.488Gb/s bi-directional data links
* 1310nm FP laser and PIN photodetector for 2km transmission
* Compliant with SFP MSA and SFF-8472 with duplex LC receptacle
* Digital Diagnostic Monitoring:
Internal Calibration or External Calibration
* Compatible with RoHS
* +3.3V single power supply
* Operating case temperature:
Standard : 0 to +70°C
Industrial : -40 to +85°C
Applications
* SDH STM-16 and SONET OC-48 system
* 2X Fiber Channel
* Switch to Switch interface
* Switched backplane applications
* Router/Server interface
* Other optical transmission systems
Description
The SFP transceivers are high performance, cost effective modules supporting dual data-rate of 2.488Gbps and 10km transmission distance with SMF.
The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA
Absolute Maximum Ratings
Table 1 - Absolute Maximum Ratings
|
Parameter |
Symbol |
Min |
Max |
Unit |
|
Supply Voltage |
Vcc |
-0.5 |
4.5 |
V |
|
Storage Temperature |
Ts |
-40 |
+85 |
°C |
|
Operating Humidity |
- |
5 |
85 |
% |
Recommended Operating Conditions
Table 2 - Recommended Operating Conditions
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
|
Operating Case Temperature |
Standard |
Tc |
0 |
|
+70 |
°C |
|
Industrial |
-40 |
|
+85 |
°C |
||
|
Power Supply Voltage |
Vcc |
3.13 |
3.3 |
3.47 |
V |
|
|
Power Supply Current |
Icc |
|
|
300 |
mA |
|
|
Data Rate |
|
|
2.488 |
|
Gbps |
|
Optical and Electrical Characteristics
ST-OC48-02: (FP and PIN, 1310nm, 2km Reach)
Table 3 - Optical and Electrical Characteristics
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
||
|
Transmitter |
||||||||
|
Centre Wavelength |
λc |
1260 |
1310 |
1360 |
nm |
|
||
|
Spectral Width (RMS) |
σ |
|
|
4 |
nm |
|
||
|
Average Output Power |
Pout |
-10 |
|
-3 |
dBm |
1 |
||
|
Extinction Ratio |
ER |
9 |
|
|
dB |
|
||
|
Optical Rise/Fall Time (20%~80%) |
tr/tf |
|
|
0.16 |
ns |
|
||
|
Data Input Swing Differential |
VIN |
400 |
|
1800 |
mV |
2 |
||
|
Input Differential Impedance |
ZIN |
90 |
100 |
110 |
Ω |
|
||
|
TX Disable |
Disable |
|
2.0 |
|
Vcc |
V |
|
|
|
Enable |
|
0 |
|
0.8 |
V |
|
||
|
TX Fault |
Fault |
|
2.0 |
|
Vcc |
V |
|
|
|
Normal |
|
0 |
|
0.8 |
V |
|
||
|
Receiver |
||||||||
|
Centre Wavelength |
λc |
1260 |
|
1580 |
nm |
|
||
|
Receiver Sensitivity |
|
|
|
-18 |
dBm |
3 |
||
|
Receiver Overload |
|
-3 |
|
|
dBm |
3 |
||
|
LOS De-Assert |
LOSD |
|
|
-20 |
dBm |
|
||
|
LOS Assert |
LOSA |
-30 |
|
|
dBm |
|
||
|
LOS Hysteresis |
|
1 |
|
4 |
dB |
|
||
|
Data Output Swing Differential |
Vout |
370 |
|
1800 |
mV |
4 |
||
|
LOS |
High |
2.0 |
|
Vcc |
V |
|
||
|
Low |
|
|
0.8 |
V |
|
|||
Notes:
- The optical power is launched into SMF.
- PECL input, internally AC-coupled and terminated.
- Measured with a PRBS 223-1 test pattern @2488Mbps, BER ≤1×10-12.
- Internally AC-coupled.
Timing and Electrical
Table 4 - Timing and Electrical
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Tx Disable Negate Time |
t_on |
|
|
1 |
ms |
|
Tx Disable Assert Time |
t_off |
|
|
10 |
µs |
|
Time To Initialize, including Reset of Tx Fault |
t_init |
|
|
300 |
ms |
|
Tx Fault Assert Time |
t_fault |
|
|
100 |
µs |
|
Tx Disable To Reset |
t_reset |
10 |
|
|
µs |
|
LOS Assert Time |
t_loss_on |
|
|
100 |
µs |
|
LOS De-assert Time |
t_loss_off |
|
|
100 |
µs |
|
Serial ID Clock Rate |
f_serial_clock |
|
|
400 |
KHz |
|
MOD_DEF (0:2)-High |
VH |
2 |
|
Vcc |
V |
|
MOD_DEF (0:2)-Low |
VL |
|
|
0.8 |
V |
Diagnostics
Table 5 – Diagnostics Specification
|
Parameter |
Range |
Unit |
Accuracy |
Calibration |
|
Temperature |
0 to +70 |
°C |
±3°C |
Internal / External |
|
-40 to +85 |
||||
|
Voltage |
3.0 to 3.6 |
V |
±3% |
Internal / External |
|
Bias Current |
0 to 100 |
mA |
±10% |
Internal / External |
|
TX Power |
-10 to -3 |
dBm |
±3dB |
Internal / External |
|
RX Power |
-23 to -3 |
dBm |
±3dB |
Internal / External |
Digital Diagnostic Memory Map
The transceivers provide serial ID memory contents and diagnostic information about the present operating conditions by the 2-wire serial interface (SCL, SDA).
The diagnostic information with internal calibration or external calibration all are implemented, including received power monitoring, transmitted power monitoring, bias current monitoring, supply voltage monitoring and temperature monitoring.
Related products
$850.00 $790.00
100Gb/s QSFP28 ER4 40km Optical Transceiver
Features Hot Pluggable QSFP28 form factor Supports aggregate bit rate up to 103.125Gb/s LC Dupl...
Features Hot Pluggable QSFP28 form factor Supports aggregate bit rate up to 103.125Gb/s LC Duplex optical interface 4x25Gb/s LAN-WDM transmitter, EML laser,APD array detector Operating case temperature:0 to 70 °C Low power consumption <4.5W Applicable for 40km SMF connection without FEC All-metal housing for superior EMI performance IIC management interface Single +3.3V power supply RoHS compliant (lead free) Applications 100G Ethernet Other optical links Standards SFF8436,SFF...
$0.00
Finisar FTL410QE2C 40Gbps QSFP+ short-reach opt...
Product Overview The Finisar FTL410QE2C is a 40Gbps QSFP+ short-reach optical transceiver designe...
Product Overview The Finisar FTL410QE2C is a 40Gbps QSFP+ short-reach optical transceiver designed for high-density data center applications. Operating under the 40GBASE-SR4 standard, it uses four 850nm VCSEL lanes to deliver reliable transmission up to 100 meters (OM3) or 150 meters (OM4) over multi-mode fiber (MMF). This hot-pluggable module is optimized for rack-to-rack and server-to-switch connections within data centers. Click on email or WhatsApp. Online customer service. Key Specifica...
$0.00
Ericsson RDH 102 75/3 R1A (RTXM330-201-C24) 25G...
Product Description The Ericsson RDH 102 75/3 R1A is a high-performance 25G SFP28 optical transce...
Product Description The Ericsson RDH 102 75/3 R1A is a high-performance 25G SFP28 optical transceiver designed for medium-reach 25Gbps fiber communications in 5G telecom and wireless infrastructure environments. It operates at 25GBASE-LR I-Temp with a 1310nm wavelength over single-mode fiber (SMF), delivering reliable transmission up to 10km via duplex LC connectors. This hot-pluggable module is fully qualified for Ericsson networking platforms and features an industrial temperature range (-4...
$0.00
Juniper Networks 740-013111-01 1Gbps SFP copper...
Product Overview The Juniper 740-013111-01 is a 1Gbps SFP copper transceiver (RJ45) designed for ...
Product Overview The Juniper 740-013111-01 is a 1Gbps SFP copper transceiver (RJ45) designed for short-range Ethernet connections over twisted-pair copper cabling. It converts SFP fiber ports to RJ45 copper ports, enabling 1G Ethernet connectivity over existing copper infrastructure, with a maximum reach of 100 meters. Click on email or WhatsApp. Online customer service. Key Specifications Parameter Details Part Number 740-013111-01 (Rev 01) Product Type SFP 1GE Copper Transceiv...