100Gbps Single Mode 10KM QSFP28 Transceiver
100Gbps Single Mode 10KM QSFP28 Transceiver
Description
The100Gb/s QSFP28 LR4 transceiver is compliant with the QSFP28 MSA and IEEE 802.3ba. QSFP28 LR4 transceiver modules are designed for use in 100 Gigabit Ethernet interfaces over single mode fiber.
Feature
- Hot-pluggable QSFP28 form factor
- Supports 103.1Gb/s aggregate bit rates
- Maximum link length of 10km on Single Mode Fiber (SMF)
- Power dissipation < 3.5W
- Built-in digital diagnostic functions
- Built-in CIDR
- 4x278Gb/s DFB-based LAN-WDM transmitter
- Duplex LC receptacles
- Single3V power supply
- RoHS compliant
Operating case temperature: 0~+70°C
Application
100GBASE-LR4 100G Ethernet
Absolute Maximum Ratings(TC=25°C, UNLESS OTHERWISE NOTED)
Module performance is not guaranteed beyond the operating range.
Exceeding the limits below may damage the transceiver module permanently.
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
|
Storage Temperature |
Ts |
-40 |
- |
+85 |
ºC |
|
|
Maximum Supply Voltage |
Vcc |
-0.3 |
- |
3.6 |
V |
|
|
Operating Relative Humidity |
RH |
15 |
- |
+85 |
% |
Recommended Operating Conditions
Parameter Symbol Min Typical Max Unit Notes
Data Rate DR 25.78±100ppm Gb/s 1
Bit Error Rate-25.78Gb/s BER 1E-12 2
Operating Case Temperature Tcase 0 70 ºC
Fiber Length on SMF L 10 km
Notes:
1. Supports 100GBASE-LR4 per IEEE 802.3ba.
2. Tested with a 231 – 1 PRBS.
Optical Specification
|
Parameter |
Symbol |
Min |
Typical |
Max |
Units |
Notes |
||||||||
|
Transmitter |
||||||||||||||
|
Signaling rate per lane |
|
25.78125±100ppm |
Gb/s |
1 |
||||||||||
|
Center wavelength |
λ |
1294.53 – 1296.59 1299.02 – 1301.09 1303.54 – 1305.63 1308.09 – 1310.19 |
nm |
|
||||||||||
|
Sidemode Suppression ratio |
SMSR |
30 |
|
|
|
|
nm |
|
||||||
|
Transmit OMA per Lane |
TXP |
-1.3 |
|
|
|
4.5 |
dBm |
|
||||||
|
Transmit Average Power per Lane |
Pout |
-4.3 |
|
|
|
4.5 |
dBm |
|
||||||
|
Optical Extinction Ratio |
ER |
4 |
|
|
|
dB |
|
|||||||
|
Average launch power of OFF transmitter, per lane |
|
|
|
|
|
-30 |
dBm |
|
||||||
|
Optical return loss tolerance |
RL |
|
|
|
|
20 |
dB |
|
||||||
|
Relative Intensity Noise |
RIN |
|
|
|
|
-130 |
dB/Hz |
|
||||||
|
Transmitter eye mask definition {X1, X2, X3, Y1, Y2, Y3}
|
|
{0.25, 0.4, 0.45, 0.25, 0.28, 0.4} |
|
2 |
||||||||||
|
Receiver |
|
-130 |
||||||||||||
|
Signaling rate per lane |
|
25.78125±100ppm |
Gb/s |
1 |
||||||||||
|
Center wavelength |
λ |
1294.53 – 1296.59 1299.02 – 1301.09 1303.54 – 1305.63 1308.09 – 1310.19 |
nm |
|
||||||||||
|
Average Receive Power per Lane |
RXP |
-10.6 |
|
4.5 |
dBm |
|
||||||||
|
Receive Power (OMA) per Lane |
RxOMA |
|
|
4.5 |
dBm |
|
||||||||
|
Receiver Reflectance |
Rfl |
|
|
-26 |
dB |
|
||||||||
|
Receive Sensitivity in OMA, each Lane |
SEN |
|
|
-8.6 |
dBm |
|
||||||||
|
LOS De-Assert |
LOSD |
|
|
-11.6 |
dBm |
|
||||||||
|
LOS Assert |
LOSA |
-24 |
|
|
dBm |
|
||||||||
|
LOS Hysteresis |
LOSh |
0.5 |
|
|
dB |
|
||||||||
Notes:
- Transmitter and receiver consists of 4 lasers and photodiode operating at 78Gb/s each for 100GBASE-LR4,
Hit ratio 5E-5.
Ordering information
|
Part Number |
Description |
|
BT-QSFP28-LR4 |
100Gbps QSFP28 LAN WDM4, LC, 10km, 0°C~+70°C, with DDM |
Related products
$0.00
Nokia RRU Network Port RJ45 Dustproof Plug Seal...
Nokia RRU Network Port RJ45 Dustproof Plug Sealing Plug 821687A 825639A Purpose: These plugs are ...
Nokia RRU Network Port RJ45 Dustproof Plug Sealing Plug 821687A 825639A Purpose: These plugs are designed to protect the RJ45 network ports on Nokia RRU (Remote Radio Unit) equipment from dust and environmental damage, ensuring longevity and reliability. Our Services Cost-effective equipment Faster delivery Worldwide shipping Alternative supply Sample service Test and warranty For this model, we have new original, cost-effective compatible, and economical second-hand cabl...
$850.00 $790.00
100Gb/s QSFP28 ER4 40km Optical Transceiver
Features Hot Pluggable QSFP28 form factor Supports aggregate bit rate up to 103.125Gb/s LC Dupl...
Features Hot Pluggable QSFP28 form factor Supports aggregate bit rate up to 103.125Gb/s LC Duplex optical interface 4x25Gb/s LAN-WDM transmitter, EML laser,APD array detector Operating case temperature:0 to 70 °C Low power consumption <4.5W Applicable for 40km SMF connection without FEC All-metal housing for superior EMI performance IIC management interface Single +3.3V power supply RoHS compliant (lead free) Applications 100G Ethernet Other optical links Standards SFF8436,SFF...
$4.00
SMA adapter cable RG58 low-loss feeder cable
SMA to TNC RF adapter cable, TNC male to SMA jumper, RG58 low-loss feeder cable, GPS antenna exte...
SMA to TNC RF adapter cable, TNC male to SMA jumper, RG58 low-loss feeder cable, GPS antenna extension cable. SMA to TNC Cable RG58 SMA Male Plug to TNC Male Low Loss Extension Cable 12inch (30cm) TNC to SMA RF Coax Adapter Cable 50 ohm for Wireless LAN Devices Click on email or WhatsApp. Online customer service. Our Services Cost-effective equipment Faster delivery Worldwide shipping Alternative supply Sample service Test and warranty For this model, we have new original, c...
$0.00
Gigabit Single-Mode Single-Fiber SC Fiber Media...
Product Description This Gigabit Single-Mode Single-Fiber SC Fiber Media Converter (Pair) is a hi...
Product Description This Gigabit Single-Mode Single-Fiber SC Fiber Media Converter (Pair) is a high-performance photoelectric conversion device. It uses single-fiber bidirectional transmission technology to achieve full-duplex Gigabit Ethernet data transmission over a single optical fiber. Designed for long-distance, high-bandwidth network expansion scenarios, it is widely used in security monitoring, enterprise networking, campus interconnection, and other fields. Click on email or WhatsApp...