SFP-25GBE-SR 100m-850mm-25G Transceiver
Product Features
- Supports up to 25.78Gbps bit rates
- Hot-pluggable SFP+ footprint
- 850nm VCSELlaser and PIN photodiode
- Up to 70m for OM3-MMF and 100m for OM4-MMF transmission
- Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle
- Compatible with RoHS
- Single +3.3V power supply
- Real Time Digital Diagnostic Monitoring
- Operating case temperature:
Standard: 0 to +70°C
Applications
- 78Gb/s single lane 100GE SR4
Description
The SFP28 transceivers are high performance, cost effective modules supporting data rate of 25.78Gbps and 70m transmission distance with OM3 MMF or 100m transmission distance with OM4 MMF.
The transceiver consists of three sections: a VCSEL laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics functions.
Absolute Maximum Ratings
|
Parameter |
Symbol |
Min |
Max |
Unit |
|
Supply Voltage |
Vcc |
-0.5 |
4.5 |
V |
|
Storage Temperature |
Ts |
-40 |
+85 |
°C |
|
Operating Humidity |
- |
5 |
85 |
% |
Recommended Operating Conditions
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Operating Case Temperature |
Tc |
0 |
|
+70 |
°C |
|
Power Supply Voltage |
Vcc |
3.135 |
3.30 |
3.465 |
V |
|
Power Supply Current |
Icc |
|
|
300 |
mA |
|
Data Rate |
|
|
25.78 |
|
Gbps |
Optical and Electrical Characteristics
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
||
|
Transmitter |
||||||||
|
Centre Wavelength |
λc |
840 |
850 |
860 |
nm |
|
||
|
Spectral Width（RMS） |
Δλ |
|
|
0.6 |
nm |
|
||
|
Side-Mode Suppression Ratio |
SMSR |
- |
- |
- |
dB |
|
||
|
Average Output Power |
Pout |
-8.4 |
|
2.4 |
dBm |
1 |
||
|
Extinction Ratio |
ER |
2.0 |
|
|
dB |
|
||
|
Data Input Swing Differential |
VIN |
180 |
|
950 |
mV |
2 |
||
|
Input Differential Impedance |
ZIN |
90 |
100 |
110 |
Ω |
|
||
|
TX Disable |
Disable |
|
2.0 |
|
Vcc |
V |
|
|
|
Enable |
|
0 |
|
0.8 |
V |
|
||
|
TX Fault |
Fault |
|
2.0 |
|
Vcc |
V |
|
|
|
Normal |
|
0 |
|
0.8 |
V |
|
||
|
Receiver |
||||||||
|
Centre Wavelength |
λc |
840 |
850 |
860 |
nm |
|
||
|
Receiver Sensitivity |
|
|
|
-10 |
dBm |
3 |
||
|
Receiver Overload |
|
2.4 |
|
|
dBm |
3 |
||
|
LOS De-Assert |
LOSD |
|
|
-13 |
dBm |
|
||
|
LOS Assert |
LOSA |
-30 |
|
|
dBm |
|
||
|
LOS Hysteresis |
|
0.5 |
|
4 |
dB |
|
||
|
Data Output Swing Differential |
Vout |
500 |
700 |
900 |
mV |
4 |
||
|
LOS |
High |
2.0 |
|
Vcc |
V |
|
||
|
Low |
|
|
0.8 |
V |
|
|||
Notes:
- The optical power is launched into MMF.
- PECL input, internally AC-coupled and terminated.
- Measured with a PRBS 231-1 test pattern @25.78Gbps, BER ≤5E-5..
- Internally AC-coupled.
Timing and Electrical
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Tx Disable Negate Time |
t_on |
|
|
2 |
ms |
|
Tx Disable Assert Time |
t_off |
|
|
100 |
µs |
|
Time To Initialize, including Reset of Tx Fault |
t_init |
|
|
300 |
ms |
|
Tx Fault Assert Time |
t_fault |
|
|
100 |
µs |
|
Tx Disable To Reset |
t_reset |
10 |
|
|
µs |
|
LOS Assert Time |
t_loss_on |
|
|
100 |
µs |
|
LOS De-assert Time |
t_loss_off |
|
|
100 |
µs |
|
Serial ID Clock Rate |
f_serial_clock |
|
100 |
400 |
KHz |
|
MOD_DEF (0:2)-High |
VH |
2 |
|
Vcc |
V |
|
MOD_DEF (0:2)-Low |
VL |
|
|
0.8 |
V |
Diagnostics
|
Parameter |
Range |
Unit |
Accuracy |
Calibration |
|
Temperature |
0 to +70 |
°C |
±3°C |
Internal |
|
Voltage |
3.0 to 3.6 |
V |
±3% |
Internal |
|
Bias Current |
0 to 20 |
mA |
±10% |
Internal |
|
TX Power |
-8.0 to 3 |
dBm |
±3dB |
Internal |
|
RX Power |
-14 to 0 |
dBm |
±3dB |
Internal |
Digital Diagnostic Memory Map
The transceivers provide serial ID memory contents and diagnostic information about the present operating conditions by the 2-wire serial interface (SCL, SDA).
The diagnostic information with internal calibration or external calibration all are implemented, including received power monitoring, transmitted power monitoring, bias current monitoring, supply voltage monitoring and temperature monitoring.
Related products
$0.00
Nokia RRU Network Port RJ45 Dustproof Plug Seal...
Nokia RRU Network Port RJ45 Dustproof Plug Sealing Plug 821687A 825639A Purpose: These plugs are ...
Nokia RRU Network Port RJ45 Dustproof Plug Sealing Plug 821687A 825639A Purpose: These plugs are designed to protect the RJ45 network ports on Nokia RRU (Remote Radio Unit) equipment from dust and environmental damage, ensuring longevity and reliability. Our Services Cost-effective equipment Faster delivery Worldwide shipping Alternative supply Sample service Test and warranty For this model, we have new original, cost-effective compatible, and economical second-hand cabl...
$850.00 $790.00
100Gb/s QSFP28 ER4 40km Optical Transceiver
Features Hot Pluggable QSFP28 form factor Supports aggregate bit rate up to 103.125Gb/s LC Dupl...
Features Hot Pluggable QSFP28 form factor Supports aggregate bit rate up to 103.125Gb/s LC Duplex optical interface 4x25Gb/s LAN-WDM transmitter, EML laser,APD array detector Operating case temperature:0 to 70 °C Low power consumption <4.5W Applicable for 40km SMF connection without FEC All-metal housing for superior EMI performance IIC management interface Single +3.3V power supply RoHS compliant (lead free) Applications 100G Ethernet Other optical links Standards SFF8436,SFF...
$4.00
SMA adapter cable RG58 low-loss feeder cable
SMA to TNC RF adapter cable, TNC male to SMA jumper, RG58 low-loss feeder cable, GPS antenna exte...
SMA to TNC RF adapter cable, TNC male to SMA jumper, RG58 low-loss feeder cable, GPS antenna extension cable. SMA to TNC Cable RG58 SMA Male Plug to TNC Male Low Loss Extension Cable 12inch (30cm) TNC to SMA RF Coax Adapter Cable 50 ohm for Wireless LAN Devices Click on email or WhatsApp. Online customer service. Our Services Cost-effective equipment Faster delivery Worldwide shipping Alternative supply Sample service Test and warranty For this model, we have new original, c...
$0.00
Gigabit Single-Mode Single-Fiber SC Fiber Media...
Product Description This Gigabit Single-Mode Single-Fiber SC Fiber Media Converter (Pair) is a hi...
Product Description This Gigabit Single-Mode Single-Fiber SC Fiber Media Converter (Pair) is a high-performance photoelectric conversion device. It uses single-fiber bidirectional transmission technology to achieve full-duplex Gigabit Ethernet data transmission over a single optical fiber. Designed for long-distance, high-bandwidth network expansion scenarios, it is widely used in security monitoring, enterprise networking, campus interconnection, and other fields. Click on email or WhatsApp...